Rinnai 32 Instantaneous

Specifications, recovery rate and who it suits.

Rinnai 32 Instantaneous

Recovery Rate @19°C960
Storage (L)N/A
1 hr1920
2 hr2880
3 hr3840
4 hr4800
5 hr5760

At a glance

On-demand supply, sized by flow

With no tank, the Rinnai 32 Instantaneous heats water as it flows, with a listed capacity of 960 L/hr at 19°C. Sizing depends on how many outlets run at once.

Compare the Rinnai 32 Instantaneous with another model

About the Rinnai 32 Instantaneous

The Rinnai 32 Instantaneous is an instantaneous (on-demand) hot water system. It has no storage tank, so it heats water as it flows rather than keeping a reserve ready. Its listed capacity in our data is 960 L/hr at a 19°C temperature rise, which is about 16 L/min.

What the numbers mean

With no tank there is no stored volume to run out, so the limit is flow rate rather than reserve. Hot water keeps coming for as long as the demand stays within the system's capacity, which is why instantaneous systems are often described as providing “endless” hot water.

That also means the 960 L/hr figure is not directly comparable with the recovery rate of a storage system, which describes how quickly a tank refills after being drawn down. Capacity is also tied to the temperature rise: if your incoming water is colder than 19°C, the usable flow at your chosen temperature will be lower.

Who it suits

How many outlets an instantaneous system can serve at once depends on the incoming water temperature, the delivery temperature you want and the flow rate of each fixture, so it is worth having an installer size it against your household's busiest moment, such as two showers running together. These systems also need suitable gas or electrical capacity, so check your supply before choosing one.

How it compares

Here is where the Rinnai 32 Instantaneous sits among the 15 models in our data.

Similar systems to consider

Before you buy

Specifications are only part of the decision. Installation requirements (such as gas or electrical supply, roof space for solar collectors, or outdoor space for a heat pump unit), running costs, warranty terms and available rebates differ by model and by state, so confirm them with the manufacturer or a licensed installer. Figures on this page come from the HWS Comparison Pro dataset, last updated 7 November 2026.